XP-200 Heavy-Duty Concrete Floor Scarifier Machine Manufacturer in China

Industrial Concrete Floor Scarifier and Milling Machine

The XP-200 Heavy-Duty Concrete Floor Scarifier Machine is designed for aggressive concrete surface preparation, floor leveling, coating removal and industrial floor renovation. Also known as a concrete floor milling machine or concrete planer, it uses a rotating cutter drum to chip, plane and texture the surface rather than gradually grinding it with diamond tooling.

Powered by a 7.4 hp / 5.5 kW three-phase motor, the XP-200 provides a 7.9 in / 200 mm working width and a production capacity of approximately 646–861 ft²/h / 60–80 m²/h. Its adjustable milling system provides precise material removal for different concrete conditions and project requirements.

The machine can remove up to approximately 0.12 in / 3 mm from hard concrete and up to 0.24 in / 6 mm from softer concrete. Actual removal depth per pass depends on concrete strength, cutter type, drum configuration, machine travel speed and the condition of the surface.

Designed to Scarify Concrete Floors

The XP-200 uses replaceable cutters mounted on a rotating drum. As the drum turns, the cutters repeatedly strike the floor, breaking away coatings, contamination and surface material.

This aggressive mechanical action makes the machine suitable for:

• Removing old epoxy floor coatings
• Removing paint and floor markings
• Eliminating oil-contaminated concrete surfaces
• Leveling uneven concrete
• Removing weak or deteriorated surface layers
• Preparing hard and wear-resistant floors
• Creating a textured surface for new coatings
• Reducing high spots and floor irregularities
• Renovating factory and warehouse floors
• Preparing concrete before resurfacing
• Roughening smooth cement surfaces
• Maintaining concrete pavement and industrial yards

High-Productivity Surface Removal

With a working width of 200 mm and rated output of approximately 60–80 m² per hour, the XP-200 combines aggressive material removal with a relatively compact operating footprint.

The 200 mm width is suitable for warehouses, workshops, factories, parking facilities and commercial renovation projects. It is large enough to achieve efficient coverage while remaining manageable around walls, columns, doorways and restricted working areas.

Productivity varies according to:

• Concrete hardness
• Coating type and thickness
• Required removal depth
• Selected cutter configuration
• Cutter wear
• Operator walking speed
• Number of passes
• Dust-extraction performance
• Floor flatness and condition

Adjustable Cutting Depth for Hard and Soft Concrete

The shock-absorbing milling assembly provides an adjustable working-depth range of approximately 0.1–6 mm. This allows operators to adapt the machine to light texturing, coating removal, surface correction or more aggressive milling.

According to the brochure:

• Hard concrete: up to approximately 3 mm
• Softer concrete: up to approximately 6 mm
• Overall adjustable milling range: approximately 0.1–6 mm

The full 6 mm depth should not be presented as achievable on every surface. Hard concrete normally requires shallower passes to protect the cutters, maintain control and produce a more uniform finish.

Japanese Braking System for Controlled Operation

The XP-200 is equipped with a braking system imported from Japan. The system helps the operator maintain more controlled forward movement, reducing the physical effort required to manage the machine during aggressive floor scarifying.

More consistent movement also helps prevent the machine from remaining too long in one position, supporting a more uniform milled surface and reducing the risk of excessive localized removal.

Shock-Absorbing Milling Structure

A shock-absorbing design using imported components helps manage the impact and vibration generated by the rotating scarifier drum. This supports more stable cutter contact and improves machine control on hard concrete and wear-resistant industrial floors.

Reduced vibration can also help:

• Improve operator comfort
• Maintain consistent cutting action
• Reduce unnecessary machine movement
• Protect mechanical components
• Produce a more even surface profile

Plug-and-Play Dust Extraction

The XP-200 can be supplied with an integrated or matched dust-extraction configuration. The brochure describes the vacuum as plug-and-play, requiring no separate field wiring between the scarifier and compatible extraction system.

Collecting dust close to the cutter drum helps:

• Reduce airborne concrete dust
• Improve visibility around the cutting path
• Limit dust accumulation on the prepared floor
• Reduce post-operation cleanup
• Protect surrounding equipment and working areas
• Support a cleaner surface-preparation workflow

The machine is designed to support continuous dust-controlled operation for up to 24 hours when used with the correctly configured extraction system and appropriate operating and maintenance intervals.

Actual continuous operating capability depends on filter condition, dust volume, cutter configuration, ambient conditions, electrical supply and scheduled inspection.

Concrete Floor Grinder vs Scarifier

A concrete floor grinder removes material gradually using rotating diamond tools. It is generally selected for smoothing, fine coating removal, scratch refinement and concrete polishing.

A concrete floor scarifier uses a rotating drum fitted with impact cutters. It removes material more aggressively and creates a rougher surface profile.

Choose the XP-200 floor scarifier when the project requires:

• Faster removal of thick coatings
• Reduction of concrete high spots
• Removal of damaged surface material
• Aggressive floor texturing
• Greater material removal per pass
• Preparation for thick industrial coatings or overlays

Choose a concrete floor grinder when the project requires:

• A smoother finished surface
• Fine scratch removal
• Concrete polishing
• Gradual surface refinement
• Light adhesive or coating removal

For many industrial projects, the XP-200 completes the initial aggressive removal, followed by a concrete floor grinder using metal-bond diamond tools to refine the surface.

Recommended Applications

• Concrete floor scarifying
• Cement floor preparation
• Epoxy coating removal
• Paint and line-marking removal
• Oil-contaminated surface removal
• Concrete leveling
• High-spot reduction
• Hardened floor renovation
• Wear-resistant floor preparation
• Warehouse floor refurbishment
• Factory floor renovation
• Parking-area maintenance
• Bridge-deck surface preparation
• Industrial yard maintenance
• Surface roughening before recoating
• Concrete repair and resurfacing preparation